Error Codes in Reports
Some
Configuration Manager 2007 reports display error codes in reports,
rather than a description of the error. Examples include the client
deployment, client assignment, and client communication reports. You
might also see them in reports relating to software updates.
Solution
For information about how to map these error codes to an error description, see http://go.microsoft.com/fwlink/?LinkId=103419.
Client Custom Error Codes
| Error Code | Description |
|---|---|
| CCM_ERRORCODE(0x 80040200) NAMENOTFOUND 2147746304 | Name not found |
| CCM_ERRORCODE(0x 80040201) BADNAMEFORMAT 2147746305 | Incorrect name format |
| CCM_ERRORCODE(0x 80040202) SERVICESHUTDOWN 2147746306 | Service is shutting down |
| CCM_ERRORCODE(0x 80040203) DATAEMPTY 2147746307 | No data supplied |
| CCM_ERRORCODE(0x 80040204) DATATOOLARGE 2147746308 | Data too large |
| CCM_ERRORCODE(0x 80040205) INVALIDPATH 2147746309 | Invalid path |
| CCM_ERRORCODE(0x 80040206) INVALIDFILE 2147746310 | Invalid file |
| CCM_ERRORCODE(0x 80040207) PARSE 2147746311 | Parsing error |
| CCM_ERRORCODE(0x 80040208) INVALIDCOMMAND 2147746312 | Invalid command |
| CCM_ERRORCODE(0x 80040209) DATATYPEMISMATCH 2147746313 | Data type mismatch |
| CCM_ERRORCODE(0x 80040210)
INVALIDTRANSLATOR 2147746320 | Invalid Translator |
| CCM_ERRORCODE(0x 80040211) INVALIDADDRESS 2147746321 | Invalid Address |
| CCM_ERRORCODE(0x 80040212) CONTEXTCLOSED 2147746322 | Context is closed |
| CCM_ERRORCODE(0x 80040213) TIMEOUT 2147746323 | Timeout occurred |
| CCM_ERRORCODE(0x 80040214) INVALIDNAMELEN 2147746324 | Invalid name length |
| CCM_ERRORCODE(0x 80040215) ITEMNOTFOUND 2147746325 | Item not found |
| CCM_ERRORCODE(0x 80040216)
INVALIDSERVICEPARAM 2147746326 | Invalid service parameter. The WMI file could be corrupt or there was a manual change to a site control file. |
| CCM_ERRORCODE(0x 80040217) DATACORRUPT 2147746327 | Data is corrupt |
| CCM_ERRORCODE(0x 80040218) INVALIDSERVICESETTING 2147746328 | Invalid service settings |
| CCM_ERRORCODE(0x 80040219) GLOBALSERVICENOTSET 2147746329 | Global service not set |
| CCM_ERRORCODE(0x 80040220) INVALIDTYPE 2147746336 | Invalid type |
| CCM_ERRORCODE(0x 80040221) INVALIDUSER 2147746337 | Invalid user. An operation for a user that is not logged on is in process or the user account is invalid. |
| CCM_ERRORCODE(0x 80040222)
CANCELLED 2147746338 | Operation cancelled |
| CCM_ERRORCODE(0x 80040223) VERSIONMISMATCH 2147746339 | Version mismatch |
| CCM_ERRORCODE(0x 80040224) INVALIDMESSAGE 2147746340 | Invalid message |
| CCM_ERRORCODE(0x 80040225)
INVALIDADDRESSTYPE 2147746341 | Invalid address type |
| CCM_ERRORCODE(0x 80040226) INVALIDPROTOCOL 2147746342 | Invalid protocol |
| CCM_ERRORCODE(0x 80040227) DISABLED 2147746343 | Functionality disabled |
| CCM_ERRORCODE(0x 80040228) INVALIDENDPOINT 2147746344 | Invalid endpoint |
| CCM_ERRORCODE(0x 80040229) GETCREDENTIALS 2147746345 | Failed to get credentials |
| CCM_ERRORCODE(0x 80040230) LOGONUSER 2147746352 | Error logging on as given credentials |
| CCM_ERRORCODE(0x 80040231) TRANSIENT 2147746353 | Transient error that could indicate a network problem. |
| CCM_ERRORCODE(0x 80040232) MESSAGENOTSIGNED 2147746354 | Message not signed |
| CCM_E_MESSAGENOTTRUSTED(0X 0x80040233) 2147746355 | Message not trusted |
| CCM_ERRORCODE(0x 80040234) INTERNALENDPOINT 2147746356 | Internal endpoint cannot receive a remote message |
| CCM_ERRORCODE(0x 80040235) PARSE_SYNTAX 2147746357 | Syntax error occurred while parsing |
| CCM_ERRORCODE(0x 80040236) LOWMEMORY 2147746358 | Low memory. |
| CCM_ERRORCODE(0x 80040237) REPLYMODE_INCOMPATIBLE 2147746359 | Reply mode incompatible |
| CCM_ERRORCODE(0x 80040238) PUBLIC_KEY_NOT_FOUND 2147746360 | Public key not found |
| CCM_ERRORCODE(0x 80040239) CLIENT_ID_NOT_FOUND 2147746361 | Client ID not found |
| CCM_ERRORCODE(0x 80040240) INSUFFICIENTDISKSPACE 2147746368 | Insufficient disk space |
| CCM_ERRORCODE(0x 80040241) DATABASE_CONNECT_FAILED 2147746369 | Failed to connect to database |
| CCM_ERRORCODE(0x 80040242) STORED_PROCEDURE_FAILED 2147746370 | Stored procedure failed |
| CCM_ERRORCODE(0x 80040243) PUBLIC_KEY_MISMATCH 2147746371 | Public key mismatch |
| CCM_E_BAD_HTTP_STATUS_CODE (0x 8004027E) 2147746430 | Client communication from the management point failed. |
| CCM_E_EMPTY_CERT_STORE (0x 80040280) 2147746432 | A valid certificate was not found in the certificate store. |
| CCM_E_NO_CERT_MATCHING_CRITERIA (0x 80040281) 2147746433 | No valid certificate could be found using the specified certificate selection. |
| CCM_E_TOO_MANY_CERTS (0x 080040282) 2147746434 | More than one valid certificate was located |
| CCM_E_MISSING_PRIVATEKEY (0x 080040283) 2147746435 | The selected certificate does not have a corresponding private key, which is required for successful communication. |
| CCM_E_MISSING_SUBJECT_NAME (0x 080040284) 2147746436 | The selected certificate does not have a Subject Name defined. |
| CCM_E_UNKNOWN_SEARCH_CRITERIA (0x 080040285) 2147746436 | The certificate selection criteria syntax is invalid. |
| CCM_E_INVALID_SMS_AUTHORITY (0x 080040286) 2147746437 | The certificate does not successfully chain to a trusted root certification authority. |
| CCM_E_MISSING_SITE_SIGNING_CERT (0x 080040287) 2147746438 | Cannot locate the required Configuration Manager site server signing certificate for this site. |
| HandleRemoteSyncSend failed (0x80040309). 2147746569 | The 'trust failed'. This happens when the client doesn't trust data from the management point. |
| CForwarder_Sync::Send failed (0x80040309). 2147746569 | The 'trust failed'. This happens when the client doesn't trust data from the management point. |
| CForwarder_Base::Send failed (0x80040309). 2147746569 | The 'trust failed' This happens when the client doesn't trust data from the management point. |
| CCM_E_LOCATION_MPREFRESH CCM_ERRORCODE(0x80040300) 2147746560 | Client trying to refresh management point and it is empty. |
| CCM_E_LOCATION_NOAD CCM_ERRORCODE(0x80040301) 2147746561 | Client is configured to only read Active Directory Domain Services and couldn’t find the requested location (site assignment, management point) data. |
| CCM_E_LOCATION_NOTASSIGNED CCM_ERRORCODE(0x80040302) 2147746562 | Client is trying to do something that requires being assigned to a site and it is not assigned. Only called from NAP when trying to refresh the management point. |
| CCM_E_LOCATION_INTERNALERROR CCM_ERRORCODE(0x80040303) 2147746563 | Internal error |
| CCM_E_LOCATION_BADSERVERCERT CCM_ERRORCODE(0x80040304) 2147746564 | Management point certification is corrupt from client’s perspective, which could be due to network corruption or an attacker. |
| CCM_E_LOCATION_BADCLIENTCERT CCM_ERRORCODE(0x80040305) 2147746565 | Client certification is corrupt from site system's perspective, which could be due to network corruption or an attacker. |
| CCM_E_LOCATION_MPUNREACHABLE CCM_ERRORCODE(0x80040306) 2147746566 | Client failed to connect to management point to make a location services request (MPLIST or MPKEYINFORMATION). |
| CCM_E_LOCATION_PROXYMPREFRESH CCM_ERRORCODE(0x80040307) 2147746567 | Client is trying to refresh proxy management point and it’s empty. May only be called from NAP when trying to refresh the proxy management point. |
| CCM_E_LOCATION_LOCALMPREFRESH CCM_ERRORCODE(0x80040308) 2147746568 | Client is trying to refresh local management point and it’s empty. Only called from NAP when trying to refresh proxy management point. |
| CCM_E_LOCATION_MESSAGEFAILED CCM_ERRORCODE(0x80040309) 2147746569 | In most cases this indicates that the in band server authorization failed on a client, usually because the trusted root key does not match the management point certificate. |
Desired Configuration Management Custom Error Codes
| Error Code | Description |
|---|---|
| 0x80040752 E_DCM_DOTNETMISSING | Microsoft .NET Framework 2.0 or later not installed |
| 0x80040756 E_DCM_SDM_REPORTING_FAILED 2147747670 | Client failed to report state or status. |
| 0x80040763 E_DCM_CI_INTERNAL_FAILURE 2147747683 | WMI corruption or heap corruption |
| 0x80040764 E_DCM_SDM_INTERNAL_FAILURE | WMI corruption, memory corruption, disk corruption |
| 0x80040765 E_DCM_SDM_CLRHOST_LAUNCH_FAILURE | Problem with client installation or.NET Framework 2.0 installation |
Inventory Custom Error Codes
| Error Code | Description |
|---|---|
| 0x80040900 | A valid WMI instance inventoried could not be added to the report. The __Path property may be undefined. |
Mobile Device Management Custom Error Codes
| Error Code | Description |
|---|---|
| -2147220846 FFFFFFFF80040292 | Unable to compute message signature for in-band authentication. |
| -2147220843 FFFFFFFF80040295 | Unable to find a valid client authentication certificate for registration. |
| 11520 | Mobile device client deployment action failed. Failed to establish ActiveSync or Mobile Device Center connection to the mobile device. |
| 11521 | Mobile device client deployment action failed. Invalid client settings file. |
| 11522 | Mobile device client deployment action failed. Error determining running directory for DmClientXfer.exe |
| 11523 | Mobile device client deployment action failed. Required ActiveSync libraries missing. |
| 11524 | Mobile device client deployment action failed. Could not determine processor type of attached mobile device. |
| 11525 | Mobile device client deployment action failed. Could not determine base operating system version of attached mobile device. |
| 11526 | Mobile device client deployment action failed. Error determining client version for the attached mobile device. |
| 11527 | Mobile device client deployment action failed. Error creating client settings .ini file. |
| 11528 | Mobile device client deployment action failed. Failed to copy files to the attached mobile device. |
| 11529 | Mobile device client deployment action failed. Failed executing the mobile device client installer program on attached mobile device. |
| 11530 | Mobile device client deployment action may have failed. Failed reading status information from the mobile device. |
| 11540 | Mobile device client deployment action failed. Error determining running directory for the mobile device client installer program. |
| 11541 | Mobile device client deployment action failed. Error executing the pre-install command line. |
| 11542 | Mobile device client deployment action failed. Error executing the post-install command line. |
| 11550 | Mobile device client installation or upgrade failed. Error during removal of the previous client. |
| 11551 | Mobile device client installation or upgrade failed. Invalid client settings file. |
| 11552 | Mobile device client installation or upgrade failed. Error installing client CAB file. |
| 11553 | Mobile device client installation or upgrade failed. Error starting client service. |
| 11554 | Mobile device client installation or upgrade failed. Error updating client settings. |
| 11555 | Device Client Deployment failed with unknown error. |
| 11560 | Mobile device client verification or repair failed. Error during removal of previous client. |
| 11561 | Mobile device client verification or repair failed. Invalid client settings file. |
| 11562 | Mobile device client verification or repair failed. Error installing client CAB file. |
| 11563 | Mobile device client verification or repair failed. Error starting client service. |
| 11564 | Mobile device client verification or repair failed. Error updating client settings. |
| 11565 | Mobile device client verification or repair failed. Error restoring required files. |
| 11566 | Mobile device client privileged certificate installation failed. |
| 11567 | Encountered unknown error installing the device client. |
| 11568 | Mobile device client setup failed to launch during install. |
| 11570 | Mobile device client removal failed. Error using unload.exe to uninstall the existing client. |
| 11571 | Mobile device client install/upgrade failed. Error enforcing new client. Mobile device rolled back to old client (if existed before). |
| 11572 | Mobile device client rollback failed during unsuccessful upgrade. Error enforcing old client. |
| 11573 | Mobile device client failed to perform post cab install actions. Device client installation failed. |
Operating System Deployment Custom Error Codes
| Error Code | Description |
|---|---|
| 0x80040001 | Could not get the client GUID |
| 0x80040101 | Network access account is not set |
| 0x80040102 | No content location returned for the given package |
| 0x80040103 | Could not access package content in the DP |
| 0x80040104 | Could not find reference program policy |
| 0x80040105 | Could not find CCM_ClientAgentConfig raw policy |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | An invalid image capture path has been specified. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,2) | An invalid image file name extension has been specified. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,3) | An invalid image file name extension has been specified. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,4) | Image capture path is too long |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,5) | An invalid image file name extension has been specified. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | Timeout waiting for PNP to finish initialization. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,2) | Task sequence failed in Windows PE |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | An invalid network adapter index has been specified |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | Sysprep is not installed |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,2) | Sysprep is invalid |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,3) | Invalid System Partition |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,4) | Machine is joined to a domain |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,5) | Machine is domain controller |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | A default management point has not been assigned for this site. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,2) | Certificates for the default management point are not available. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,3) | Package {0} is not available on the specified distribution points. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,4) | Invalid password for media certificate |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,5) | The media certificate does not have an associated private key |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,6) | The certification authority’s certificate has not been set for this site. |
Remote Tools Custom Error Codes
| Error Code | Description |
|---|---|
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,1) | Another remote control session is already in progress. Remote Control does not support multiple concurrent remote control sessions. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,2) | Level of access allowed is set to “No Access” in the Remote Tools client agent General tab on the site server or in the Remote Control control panel applet. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,3) | Remote Control Agent was not properly installed on the client. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,4) | No interactive session found on the client. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,5) | Remote computer screen is locked. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,6) | Failed to create the RDP session. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,8) | Remote Tools is disabled. |
| MAKE_HRESULT(SEVERITY_ERROR,FACILITY_ITF,9) | Failed to launch the Remote Control Agent process. |
Software Distribution Custom Error Codes
| Error Code | Description |
|---|---|
| E_FAIL_EXECUTION_PENDING 0x80008001 | The program cannot be run now from the client UI because : A restart is in progress. or Software Distribution is paused because of a task sequence running or Another program is currently running NOTE: This error code is only returned to the UI and is not present in status messages. |
| E_FAIL_DUPLICATE_REQUEST 0x80008002 | The program cannot be run again from the client UI because it is already pending, an optional (initiated from the UI) run request already exists for it. NOTE: This error code is only returned to the UI and is not present in status messages. |
| E_SWDIST_POLICY_NOT_FOUND 0x80002004 | The software distribution policy was not found. |
| E_FAIL_PROGRAM_DISABLED 0x80008004 | The program cannot run because it is currently disabled. |
| E_FAIL_INVALID_POLICY 0x80008005 | This error code can be returned on the client if policy cannot be found or the policy is not valid to run or cancel the requested program. NOTE: This error code is currently not sent in status messages. |
| E_FAIL_INVALID_PROGRAM 0x80008006 | The requested program is not currently pending. This error code can be returned on the client if the user attempts to continue or cancel the program that is not currently pending. It can also be returned to the task sequence manager (TSM) when TSM requests download locations for packages that are not referenced by the currently running task sequence. NOTE: This error code is not raised in status messages by Software distribution, but could be raised by task sequence. |
| E_FAIL_SET_CACHEDCONTENTINUSE 0x80008008 | Unable to set the CachedContentInUse flag. Failed to indicate the client cache is currently in use. |
| E_FAIL_WMI_ERROR 0x80008009 | Failed to read data from WMI. The program could not continue because a system restart is in progress or there is already a run request for this program that requires a reboot. |
| E_FAIL_REQUEST_NOT_FOUND 0x80008011 | Used for Task Sequence. Failed to reconnect to Task Sequence job because a request cannot be found with the given job ID. NOTE: Not sent in status message by Software Distribution, but may be used by task sequence. |
| E_FAIL_ACTIVE_REQUEST_NOT_FOUND 0x80008012 | There is no program currently running. This error code is returned to task sequence when there is no run request that is currently running, but task sequence tries to get the currently running request. |
| E_FAIL_DEPENDENCY_NOT_RUN 0x80008013 | This program cannot run because it depends on another program that has not run successfully before. This error code is returned to task sequence manager when a task sequence Install Software Action step cannot be run because the step has a child program which has not been run before. |
| E_FAIL_USER_REQUIRED 0x80008014 | This error code is returned to task sequence manager when an “Install Software” step cannot be run because the software distribution program in this step is targeted to a user, requires user input or is set to run in user context |
| E_FAIL_SWD_NOT_PAUSED 0x80008015 | Failed to notify caller that software distribution is paused because the paused state or paused cookie do not match. |
| E_FAIL_INVALID_HASH 0x80008017 | The content hash string or hash versions are empty or incorrect in the software distribution policy or the hash verification failed. |
| E_FAIL_CANNOT_RUN_ON_INTERNET 0x80008018 | The program cannot run at this time because the client is on the internet. |
| E_FAIL_EXECUTION_NONFATAL 0x80008100 | A non fatal error has been encountered while attempting to run the program. The program execution will be retried if the retry count has not been exceeded. |
| E_FAIL_BAD_ENVIRONMENT_NONFATAL 0x80008103 | A non fatal error occurred while preparing to run the program, for example when creating the program execution environment, making a network connection, impersonating the user, determining the file association information, or when attempting to launch the program. This program execution will be retried if the retry count has not been exceeded. |
| E_FAIL_PROGRAM_NOT_MONITORED 0x80008105 | An error was encountered while getting the process information for the launched program and the program execution will not be monitored. |
| E_FAIL_BAD_ENVIRONMENT_FATAL 0x8000910A | A fatal error occurred while preparing to run the program, for example when creating the program execution environment, making a network connection, impersonating the user, determining the file association information, or when attempting to launch the program. This program execution will not be retried. |
| E_FAIL_EXECUTION_FATAL 0x80009101 | A fatal error has been encountered while attempting to run the program. The program execution will not be retried. |
| E_FAIL_INVALID_PROGRAM_OBJECT 0x80009102 | An error occurred while creating the execution context. This is error code indicates that an error was encountered while creating the internal execution context object. This is most likely not due to configuration errors, but could be because of low memory conditions, COM failures or other external errors. |
| E_FAIL_INVALID_CMDLINE 0x80009104 | The command line for this program is invalid. |
| E_FAIL_NO_CONTENT 0x80009106 | Failed to verify the executable file is valid or to construct the associated command line. |
| E_FAIL_NO_SOURCE 0x80008107 | Failed to access all the provided program locations. This program may retry if the maximum retry count has not been reached. |
| E_INVALID_CONTENT_REQUEST_HANDLE 0x80008200 | This is an internal error. No content request found with the given handle. |
| E_NO_SPACE_IN_CACHE 0x80008201 | The content download cannot be performed because there is not enough available space in cache or the disk is full. |
| E_CACHE_TOO_SMALL 0x80008202 | The content download cannot be performed because the total size of the client cache is smaller than the size of the requested content. |
| E_CACHE_IN_USE 0x80008203 | The client cache is currently in use by a running program or by a download in progress. |
| E_NO_DP_FOUND 0x80008204 | NOTE: this error code is sent at least in status message 10051. No distribution points were found for the requested content. |
| E_FAIL_LOCATION_REQUEST 0x80008210 | Failed to get content locations. |
| E_FAIL_JOB_PENDING 0x80008250 | The computer restart cannot be initiated because a software installation job is in progress. |
| E_FAIL_INACCESSIBLE_SOURCE 0x80009108 | Failed to access all the provided program locations. This program will not retry. |
| E_FAIL_INVALID_MSI 0x80009109 | Failed to verify that the given file is a valid installation package. |
Software Updates Custom Error Codes
| Error Code | Description |
|---|---|
| E_UPDDEPLOY_APPLY_NOT_REQUIRED CCM_ERRORCODE(0x80040708) 2147747592 | Software Updates Install not required. |
| E_MONITOR_RESUME_FAILURE CCM_ERRORCODE(0x80040709) 2147747593 | Failed to resume the monitoring of the process. |
| E_INVALID_CMDLINE CCM_ERRORCODE(0x8004070A) 2147747594 | Invalid command line |
| E_CREATEPROCESS_FAILURE CCM_ERRORCODE(0x8004070B) 2147747595 | Failed to create process |
| E_EXECUTION_TIMEOUT CCM_ERRORCODE(0x8004070C) 2147747596 | Software update execution timeout |
| E_UPDATE_FAILED_RESULT CCM_ERRORCODE(0x8004070D) 2147747597 | Software update failed when attempted |
| E_EMPTY_COMMANDLINE CCM_ERRORCODE(0x8004070E) 2147747598 | Empty command line specified |
| E_INVALID_INSTALLER_PATH CCM_ERRORCODE(0x8004070F) 2147747599 | Invalid updates installer path |
| E_COMPARE_CREATION_TIMES CCM_ERRORCODE(0x80040710) 2147747600 | Failed to compare process creation time. |
| E_DEPLOYMENT_NOT_ACTIVE CCM_ERRORCODE(0x80040711) 2147747601 | Software updates deployment not active yet for example, start time is in future |
| E_UPDDEPLOY_REBOOT_REQUIRED CCM_ERRORCODE(0x80040712) 2147747602 | A system restart is required to complete the installation. |
| E_NO_DETECT_RESULT CCM_ERRORCODE(0x80040713) 2147747603 | Software updates detection results not received yet. |
| E_UPDATES_USERINSTALL_RESTART_PENDING CCM_ERRORCODE(0x80040714) 2147747604 | User based install not allowed as system restart is pending. |
| E_USERINSTALL_NO_UPDATES CCM_ERRORCODE(0x80040715) 2147747605 | No applicable updates specified in user install request. |
| E_NOINTERFACE FFFFFFFF80004002 -2147467262 | No such interface supported |
| [DCOM belly up] CAgent::CreateJob failed FFFFFFFF8007000E -2147024882 | Not enough storage is available to complete this operation. |
| ERROR_TIMEOUT FFFFFFFF800705B4 -2147023436 | This operation returned because the timeout period expired. |
| [Scan fails on x64vista] OnSearchComplete 0x80240032[WU] -2145124302 | Failed to end search job [SMS] WU client failed Searching for update with error. |
| WU_E_PT_WINHTTP_NAME_NOT_RESOLVED Same as - ERROR_WINHTTP_NAME_NOT_RESOLVED FFFFFFFF8024402C -2145107924 | The proxy server or target server name cannot be resolved. |
| FFFFFFFF80040692 -2147219822 | Group Policy conflict |
| FFFFFFFF80040693 -2147219821 | Low WUA version |
| WU_E_PT_HTTP_STATUS_BAD_GATEWAY FF80244021 -2145107935 | Same as HTTP status 502. The server, while acting as a gateway or proxy, received an invalid response from the upstream server it accessed in attempting to fulfill the request. |
| -939523070 ERROR_OBJECT_ALREADY_EXISTS FFFFFFFFC8000402 | Object already exists |
| [SA fail if SWD not working] createInstance failed for UpdateServiceManager FFFFFFFF80040154 -2147221164 | Class not registered |
| FFFFFFFF800705B4 -2147023436 | This operation returned because the timeout period expired. |
| ERROR_INTERNET_TIMEOUT FFFFFFFF80072EE2 -2147012894 | Internet timeout |
| ERROR_WINHTTP_CANNOT_CONNECT or ERROR_INTERNET_CANNOT_CONNECT FFFFFFFF80072EFD -2147012867 | Internet cannot connect |
| E_INVALIDSTATE_AFTER_APPLY FFFFFFFF80040668 -2147219864 | Software update still detected as actionable after apply. |
| E_EXECUTION_TIMEOUT FFFFFFFF8004070C -2147219700 | Software update execution timeout |
| WU_E_PT_WINHTTP_NAME_NOT_RESOLVED - same as ERROR_WINHTTP_NAME_NOT_RESOLVED FFFFFFFF8024402C -2145107924 | The proxy server or target server name cannot be resolved. |
| ERROR_PATH_NOT_FOUND FFFFFFFF80070003 -2147024893 | The system cannot find the path specified. |
| ERROR_FILE_EXISTS FFFFFFFF80070050 -2147024816 | The file exists |
| ERROR_ACCESS_DENIED or E_ACCESS_DENIED FFFFFFFF80070005 -2147024891 | Access denied |
| WU_E_PT_WINHTTP_NAME_NOT_RESOLVED Same as ERROR_WINHTTP_NAME_NOT_RESOLVED FFFFFFFF8024402C -2145107924 | The proxy server or target server name cannot be resolved. |
| ERROR_INAVILD_ENVIROMENT FFFFFFFF8004070D -2147219699 | Software update failed when attempted. |
| Install Errors | |
| -Last Install Error
FF8024402C WU_E_PT_WINHTTP_NAME_NOT_RESOLVED - same as ERROR_WINHTTP_NAME_NOT_RESOLVED 2145107924 | The proxy server or target server name cannot be resolved. |
| Last Install Error
FF8007066F
ERROR_PATCH_NOT_APPLIED -2147023249 | Can sometimes happen when Windows Installer configuration for an installed application is out of sequence for example, Windows Installer thinks it has more patches applied than is really the case (this sometimes used to happen with roaming profiles). |
| Last Install Error FF8007064 ERROR_INSTALL_FAILURE -2147023293 | Generic failure code from Windows Installer installs. |
| Last Install Error FF8007F0F4 STATUS_PREREQUISITE_FAILED -2146963212 | Generated by update.exe. People seem to be getting this when they try to install a Service Pack while on battery power. |
| Last Install Error FF8007F0F5 WU_E_DM_INCORRECTFILEHASH -2146963211 | The WU Agent's metadata store and the policy received by ccmexec could be out of sync. |
| Last Install Error FF8007F0F6 ERROR INVALID PARAMETER -2146963212 | Failed to start the installation of updates because update is not found |
| Scan Failures | |
| Last Scan Error FF80244021 WU_E_PT_HTTP_STATUS_BAD_GATEWAY -2145107935 | Possible network connectivity issues |
| Last Scan Error FF8024001D WU_E_INVALID_UPDATE -2145124323 | An update contains invalid metadata. |
| Last Scan Error FF80004002 E_NOINTERFACE -2147467262 | No such interface supported |
| Last Scan Error FFC8000402 RECORD TOO BIG -939523070 | This seems to be a recoverable error, and possibly due to many Scan Service Packages left around when the 2003 ITMU was used. This is NOT the case. |
| FF8024400A WU_E_PT_SOAPCLIENT_PARSE 1097366519818 | Needs update |
| Last Scan Error WU_E_SERVICE_STOP FF8024001E -2145124322 | Operation did not complete because the service or system was being shut down. |
| Last Scan Error FF8024400D WU_E_PT_SOAP_CLIENT -2145107955 | SOAP client found the message was malformed. |
| Last Scan Error FFC800042D RefreshServerUpdateInfo -939523027 | WSUS unable to update software distribution folder. Scans fail. |
| Last Scan Error FF80244022 WU_E_PT_HTTP_STATUS_SERVICE_UNAVAIL -2145107934 | HTTP status 503. The service is temporarily overloaded. |
| Last Scan Error FF80240032 WU_E_INVALID_CRITERIA -2145124302 | The search criteria string was invalid. |
| Last Scan Error FF80240013 WU_E_DUPLICATE_ITEM -2145124333 | Failed to add file to the FileLocationList. |
| Last Scan Error FF8007041D ERROR SERVICE REQUEST TIMEOUT -2147023843 | The service did not respond to the start or control request in a timely fashion. |
| E_FAIL_POLICY_NOT_FOUND CCM_ERRORCODE(0x80040600) 2147747328 | Scan Tool Policy not found |
| E_LOCATION_TIMEOUT CCM_ERRORCODE(0x80040602) 2147747330 | Out of cache space |
| E_SCANTOOL_POLICY_REMOVED CCM_ERRORCODE(0x80040603) 2147747331 | The ScanTool Policy has been removed so cannot complete Scan Operation. |
| E_SCANTOOL_NOTFOUND_INJOBQUEUE CCM_ERRORCODE(0x80040604) 2147747332 | The ScanTool was not found in the job queue. |
| E_FAIL_SCAN_TOOL_REMOVED CCM_ERRORCODE(0x80040605) 2147747333 | Scan Tool has been Removed |
| E_FAIL_OFFLINE_SCAN_HISTORY_NOT_FOUND CCM_ERRORCODE(0x80040606) 2147747334 | Scan Tool Policy not found |
| E_CONTENT_NOT_FOUND CCM_ERRORCODE(0x80040607) 2147747335 | Out of cache space |
| E_INVALID_INSTANCE_TYPE CCM_ERRORCODE(0x80040608) 2147747336 | Out of cache space |
| E_NO_SPACE_IN_CACHE 0x80008201 2147516929 | Out of cache space |
| E_CACHE_TOO_SMALL 0x80008202 2147516930 | Cache size is smaller than requested content's size. |
| Deployments Agent Specific Errors | |
| E_UPDDEPLOY_APPLY_NOT_ALLOWED CCM_ERRORCODE(0x80040700) 2147747584 | Install not allowed |
| E_UPDDEPLOY_DOWNLOAD_NOT_ALLOWED CCM_ERRORCODE(0x80040701) 2147747585 | Download not allowed |
| E_ASSIGNMENT_POLICY_NOT_FOUND CCM_ERRORCODE(0x80040702) 2147747586 | Assignment policy not available |
| E_ANOTHER_JOB_IN_PROGRESS CCM_ERRORCODE(0x80040703) 2147747587 | Only one job is allowed at a time |
| E_HARDREBOOT_PENDING CCM_ERRORCODE(0x80040704) 2147747588 | Only one job is allowed at a time. |
| 2147747589 E_PAUSE_STATE_REQUIRED CCM_ERRORCODE(0x80040705) | Pause state required |
| 2147747590 E_NO_ACTIVE_JOB CCM_ERRORCODE(0x80040706) | No active job exists (while reconnect called). |
| 2147747591 E_JOB_ID_MISMATCH CCM_ERRORCODE(0x80040707) |
0 commenti:
Post a Comment
Give me you feedback!